Brimar 6CD6G beam tetrode
 |
This valve measures 142x50mm
overall and has an octal base. |
This valve is intended for
TV line output use, especially where high angle deflection tubes are used.
The construction of the valve is of two separate parallel cathodes, control
grids and screen grids inside a common beam plate and anode structure.
| Heater voltage |
6.3V |
| Heater current |
2.5A |
| Anode voltage |
700V |
| Peak +ve anode voltage |
7kV |
| Peak -ve anode voltage |
-1.5kV |
| Screen voltage |
175V |
| Max anode dissipation |
20W |
| Max screen dissipation |
3W |
| Pin |
Function |
| 1 |
n/c |
| 2 |
Heater |
| 3 |
Cathode + beam plates |
| 4 |
n/c |
| 5 |
Control grid |
| 6 |
n/c |
| 7 |
Heater |
| 8 |
Screen grid |
| TC |
Anode |
|
